GREAT PLANES Extra-300 50 EP 조립 설명서 - 페이지 11

{카테고리_이름} GREAT PLANES Extra-300 50 EP에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES Extra-300 50 EP 16 페이지.

페이지 인쇄
GREAT PLANES Extra-300 50 EP 조립 설명서
The rudder pull-pull cables are assembled as shown in the above diagram.
Assemble the pull-pull wires onto the rudder horn as shown, double-looping the wire through the brass
crimp sleeve before crimping. Crimp the brass crimp sleeve tightly with pliers and apply a drop of
thin CA to the crimp. Be SURE to use medium or thick CA to lock the 2mm nuts on the rudder
control horn. Feed the wires into the fuselage slots and forward to the front of the fuselage. Cross
the wires once so they make an X inside the fuselage.