GREAT PLANES ElectriFly PEAK 400 사용 설명서 - 페이지 4

{카테고리_이름} GREAT PLANES ElectriFly PEAK 400에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES ElectriFly PEAK 400 13 페이지.

CARE & HANDLING FOR N

While similar in appearance to NiCd batteries and having

the same 1.2V rating per cell, NiMH cells contain a

different chemical makeup which requires different care

and handling.

Do not to allow NiMH batteries to overheat at any

time. Heat can adversely affect the performance of

NiMH batteries. If overheating is observed, disconnect

the battery from the charger immediately and allow to

cool! Reduce charge current rate for future charges.

Store NiMH packs with some voltage remaining on the cells.

Use a NiMH battery pack no more than three cycles per day,

with a two to three hour break in-between for cooling.

More frequent use is likely to overheat the pack.

NiMH cells have a self-discharge rage of approximately

20-25% (compared to 15% for NiCd batteries).Thus, if NiMH

batteries have been inactive for more than a few days it is

important to recharge them immediately prior to use.

The Peak 400 only accepts DC input power which could

come from a power supply or 12V automotive battery. Do

not attempt to apply more than 15V to the input, as

permanent damage to the charger could result and void

the warranty. Applying less than 11V to the inputs will not

be sufficient power to allow the charger to work properly.

Securely connect the charger's red alligator clip to the

positive (+) terminal on the power source, and the black

alligator clip to the negative (-) terminal. It's best to use a

INPUT PO

MH B

WER

TTERIES