GREAT PLANES ElectriFly PEAK 400 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Зарядное устройство GREAT PLANES ElectriFly PEAK 400. GREAT PLANES ElectriFly PEAK 400 13 страниц.
Печатать страницу
CARE & HANDLING FOR N
CARE & HANDLING FOR N
While similar in appearance to NiCd batteries and having
the same 1.2V rating per cell, NiMH cells contain a
different chemical makeup which requires different care
and handling.
·
Do not to allow NiMH batteries to overheat at any
time. Heat can adversely affect the performance of
NiMH batteries. If overheating is observed, disconnect
the battery from the charger immediately and allow to
cool! Reduce charge current rate for future charges.
·
Store NiMH packs with some voltage remaining on the cells.
·
Use a NiMH battery pack no more than three cycles per day,
with a two to three hour break in-between for cooling.
More frequent use is likely to overheat the pack.
·
NiMH cells have a self-discharge rage of approximately
20-25% (compared to 15% for NiCd batteries).Thus, if NiMH
batteries have been inactive for more than a few days it is
important to recharge them immediately prior to use.
The Peak 400 only accepts DC input power which could
come from a power supply or 12V automotive battery. Do
not attempt to apply more than 15V to the input, as
permanent damage to the charger could result and void
the warranty. Applying less than 11V to the inputs will not
be sufficient power to allow the charger to work properly.
Securely connect the charger's red alligator clip to the
positive (+) terminal on the power source, and the black
alligator clip to the negative (-) terminal. It's best to use a
INPUT PO
INPUT PO
i
MH B
A
i
MH B
A
WER
WER
TTERIES
TTERIES