DayStar Filters SolaREDi 66 매뉴얼
{카테고리_이름} DayStar Filters SolaREDi 66에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DayStar Filters SolaREDi 66 17 페이지.
페이지 인쇄DAYSTAR FILTERS
Congratulations on your purchase of a SolaREDi 66 Hydrogen Alpha
solar telescope. Please read this manual before using the product.
To use the telescope, plug in the included power supply, then insert
a diagonal and eyepiece (not included) in the rear of the telescope
and set the focus to about 5½.
straight away from the indicator light. When the light turns green in
about 5-15 minutes your viewing experience can begin.
Warnings:
Do not disassemble the filter, the blocking element is separated from the
etalon and the complete assembly must be used together for safe
viewing.
Do not power the filter from a computer or cell phone charger as the
SolaREDi 66 requires a high current power supply (> 1.5A) for operation.
For assistance:
Call:
1 (866) 680-6563
Email: [email protected]
Visit:
http://www.daystarfilters.com
SOLAREDI 66
Turn the tuning knob to point