DayStar Filters SolaREDi 66 매뉴얼 - 페이지 2

{카테고리_이름} DayStar Filters SolaREDi 66에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DayStar Filters SolaREDi 66 17 페이지.

Cautions & Warnings:
There are no user serviceable parts inside the SolaREDi 66. Do not
disassemble the unit.
disassembly can cause permanent damage. All elements are required
for proper operation and removal of any internal component will cause a
malfunction that could result in unfiltered light which can cause blindness
or damage to equipment.
Solar Observing with a telescope is sensitive to certain risks.
Caution and care of the telescope and filter is advised in
assembly, use and dismantling at all times.
We recommend leaving the front cover on the telescope until the
diagonal and eyepiece are installed, and the telescope is pointed
at the Sun.
While observing, owners must take care and caution that all
parts of the filter and telescope assembly are properly affixed
and that no pieces have been opened, tampered with or
removed.
Responsible owners will be prudent to inform guest or novice
observers of the special nature of the telescope configuration so
not to imply that telescopic observing of the sun is safe without
proper filtration.
A few very important points that owners and operators must
understand:
DayStar filters are temperature sensitive.
temperature will change the wavelength (CWL) that the filter will
transmit. Users need to be aware of temperature tuning issues.
Because of the need for temperature regulation, a power
supply is required.
The F/14 focal ratio of this telescope is longer than common
nighttime telescopes, and as such, consideration must be
given to using longer focal length eyepieces and larger format
image sensors for satisfactory viewing of the Sun. Eyepieces
shorter than approximately 12mm will outresolve the diffraction
limit and not add additional detail.
Do not twist the red filter housing relative to the focuser or the
heater wire connections may pull out.
Certain components are under pressure and
Changing the