Automated Pet Care Products LITTER-ROBOT 매뉴얼 - 페이지 5
{카테고리_이름} Automated Pet Care Products LITTER-ROBOT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automated Pet Care Products LITTER-ROBOT 16 페이지. Self-cleaning litter box
Automated Pet Care Products LITTER-ROBOT에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 사용자 설명서 (19 페이지)
페이지 인쇄Automated Pet Care Products, Inc.
Cats love empty cardboard boxes. You can try
•
covering the Litter-Robot with the cardboard box it
came in. Cut an opening in the side of the box to
match the entry/exit opening in the globe and cut a
notch in the bottom for access to the drawer as
shown in the picture.
Note
Leave the Litter-Robot
unplugged while it is covered
with the box. You can run a
supervised clean cycle by
removing the box, plugging
in the power cord and
waiting for the clean cycle to
finish (it takes slightly less
than 3 minutes). Unplug the
power cord before you put
the box back to cover the
Litter-Robot.
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com
5
Automated Pet Care Products, Inc.
Setting Up Your Litter-Robot
1.
Place Litter-Robot as close to the old litter box as
possible. (Please read the section on how to get
your cats adjusted to the Litter-Robot with minimal
problems). Keep a cup of the used litter from the
old litter box and set it aside for later (see Step 8).
2.
Place the Globe on the base as shown in the
picture. Make sure that the gear track of the globe
engages with the gear in the base unit.
3.
Plug the small round connector from the AC adapter
into the socket on the base unit (see picture).
Next, plug the main power cord into a wall outlet.
The Litter-Robot will perform a cleaning cycle.
After completing the cycle (this takes about 3
minutes), the Globe should be in the "home"
position with the green light on.
At this point, the Litter-Robot is ready to be filled
with litter. However, if you want to make sure that
your cats ease into this new experience, you may
want to leave the Litter-Robot unplugged for a few
days. This will give your cats some time to get
accustomed to the Litter-Robot.
4.
Make sure the Litter-Robot is plugged in and the
globe is in the home position.
5.
Press the Fill button on the Control Panel. The
globe will rotate counter clockwise bringing the
waste ports to the top for easy filling. You can also
add litter through the entry opening, with the Litter-
Robot in the home position.
6
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com