Automated Pet Care Products LITTER-ROBOT Manual - Página 5

Procurar online ou descarregar pdf Manual para Produtos para animais de estimação Automated Pet Care Products LITTER-ROBOT. Automated Pet Care Products LITTER-ROBOT 16 páginas. Self-cleaning litter box
Também para Automated Pet Care Products LITTER-ROBOT: Manual (18 páginas), Manual do utilizador (19 páginas)

Imprimir página

Automated Pet Care Products, Inc.

Cats love empty cardboard boxes. You can try

•

covering the Litter-Robot with the cardboard box it

came in. Cut an opening in the side of the box to

match the entry/exit opening in the globe and cut a

notch in the bottom for access to the drawer as

shown in the picture.

Note

Leave the Litter-Robot

unplugged while it is covered

with the box. You can run a

supervised clean cycle by

removing the box, plugging

in the power cord and

waiting for the clean cycle to

finish (it takes slightly less

than 3 minutes). Unplug the

power cord before you put

the box back to cover the

Litter-Robot.

40 W. Howard, Suite B-5, Pontiac, MI 48342

Toll Free: 877-250-7729 Fax: 248-253-1797

www.Litter-Robot.com

Automated Pet Care Products, Inc.

Setting Up Your Litter-Robot

Place Litter-Robot as close to the old litter box as

possible. (Please read the section on how to get

your cats adjusted to the Litter-Robot with minimal

problems). Keep a cup of the used litter from the

old litter box and set it aside for later (see Step 8).

Place the Globe on the base as shown in the

picture. Make sure that the gear track of the globe

engages with the gear in the base unit.

Plug the small round connector from the AC adapter

into the socket on the base unit (see picture).

Next, plug the main power cord into a wall outlet.

The Litter-Robot will perform a cleaning cycle.

After completing the cycle (this takes about 3

minutes), the Globe should be in the "home"

position with the green light on.

At this point, the Litter-Robot is ready to be filled

with litter. However, if you want to make sure that

your cats ease into this new experience, you may

want to leave the Litter-Robot unplugged for a few

days. This will give your cats some time to get

accustomed to the Litter-Robot.

Make sure the Litter-Robot is plugged in and the

globe is in the home position.

Press the Fill button on the Control Panel. The

globe will rotate counter clockwise bringing the

waste ports to the top for easy filling. You can also

add litter through the entry opening, with the Litter-

Robot in the home position.

40 W. Howard, Suite B-5, Pontiac, MI 48342

Toll Free: 877-250-7729 Fax: 248-253-1797