HiB iCLASS SE R90 설치 매뉴얼 - 페이지 4
{카테고리_이름} HiB iCLASS SE R90에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiB iCLASS SE R90 7 페이지.
페이지 인쇄iCLASS SE
2
Wiring
P1
7
Terminal
Description
P1-1
Beeper Input
P1-2
LED Input (GRN)
P1-3
Ground (RTN)
P1-4
+VDC
P1-5
Unused
P1-6
LED Input (RED)
P1-7
Hold Input
Note: Terminal IDs have changed from the previous generation of R90 Readers. When replacing an existing R90A reader, the connector wiring must
be modified to that shown in the table prior to installing the R90E reader.
*
Tamper Output - When activated, output synchronizes to ground (default).
**
Dependent upon reader configuration. See the HTOG for Wiegand and Clock-in-Data configurations.
R90
P2
1 7
1
Terminal
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
P1
P2
7
1 7
1
Description
GPIO4 (RS485-Y / TXA)
GPIO3 (RS485-Z / TXB)
**
Wiegand Data 0 / Data
**
Wiegand Data 1 / Clock
*
Open Collector Output / Tamper
GPIO2 (RS232-R / RS485-RXB)
GPIO1 (RS232-T / RS485-RXA)
PLT-01051, A.3
ATTENTION
Observe precautions for handling