DAYTEK Laundry Quick Lock Fold Down Clothesline 설치 지침 - 페이지 2
{카테고리_이름} DAYTEK Laundry Quick Lock Fold Down Clothesline에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DAYTEK Laundry Quick Lock Fold Down Clothesline 4 페이지.
페이지 인쇄
WALL MOUNTING INSTALLATION
Materials and Tools required for installation:
•
Electronic stud finder (optional)
•
Measuring tape & pencil marker
•
Drill and drill bit (to suit your particular
attachment method)
•
Socket set and socket wrench
•
Hammer
•
Spirit level
•
Scissors
•
Fixings (if the supplied ones are not suitable
to your application)
IMPORTANT!
Incorrect installation could damage your wall or cause injury.
Daytek bears no responsibility for improper mounting that results in accident, injury or damage.
Always choose screws or fittings which are suitable for your wall material and have sufficient holding power.
Ensure your fixing surface is structurally sound.
If you are unsure of how to mount your Laundry Quick Lock Clothesline, please consult your local hardware
specialist or contact Daytek directly.
Figure 1. Laundry Quick Lock Fold Down
170mm
(Distance
between
mounting
holes)
LINE START
Consider
user height
LINE END
and reach
when
determining
mounting
height.
Location:
Ensure your selected location has sufficient clearance
either side of and below the clothesline to safely fold up
and down without obstruction.
Consider user height and reach when determining mounting
height and position.
Recommended wall area required is 1260mm x 660mm
(when folded down).
The width of your clothesline can be adjusted if necessary.
WALL BRACKET CENTRES 1200mm (Standard)
Important: Tension lines with light hand pull
FRONT BAR
GROUND LEVEL
660mm