Celec ES-30 현장 설치 매뉴얼 - 페이지 4

{카테고리_이름} Celec ES-30에 대한 현장 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celec ES-30 10 페이지.

1. Un Pack the ES-30 from box using Plastic Strip Cutter & 17 No. Spanner.

2. Collect the Accessories as per the Packing Slip.

3. Remove any cardboard or thermocol packing inside the ES-30 given for support during

transportation.

4. Install the Load Break Switch handle on the door.

5. Do not use ES-30 in case of any Breakage or loose connections or Oil Spill inside.

CAUTION

Indoor Use Only, Type-1 Enclosure.

: -

1. Choose the dry and Clean Wall to Install the ES-30 taking care conduit connections from Bottom side

Enclosure Size is 760 x 600 x 210 mm and weight

2. Premark the Mounting holes on wall or structure.

3. Make a Drill of ɸ10mm up to the depth of 50mm for the wall plugs provided as Accessories.

4. Hang the Panel on wall plugs.

5. Tighten the wall plugs.

______________________________________________________________________________________

MOUNTING

kg (

ES-30

Pounds).