Celec ES-30 Посібник з монтажу в польових умовах - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу в польових умовах для Контролер Celec ES-30. Celec ES-30 10 сторінок.

1. Un Pack the ES-30 from box using Plastic Strip Cutter & 17 No. Spanner.

2. Collect the Accessories as per the Packing Slip.

3. Remove any cardboard or thermocol packing inside the ES-30 given for support during

transportation.

4. Install the Load Break Switch handle on the door.

5. Do not use ES-30 in case of any Breakage or loose connections or Oil Spill inside.

CAUTION

Indoor Use Only, Type-1 Enclosure.

: -

1. Choose the dry and Clean Wall to Install the ES-30 taking care conduit connections from Bottom side

Enclosure Size is 760 x 600 x 210 mm and weight

2. Premark the Mounting holes on wall or structure.

3. Make a Drill of ɸ10mm up to the depth of 50mm for the wall plugs provided as Accessories.

4. Hang the Panel on wall plugs.

5. Tighten the wall plugs.

______________________________________________________________________________________

MOUNTING

kg (

ES-30

Pounds).