Celect DRF4 사용 설명서 - 페이지 6

{카테고리_이름} Celect DRF4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celect DRF4 8 페이지. Rf programmable thermostat for weekday/weekend setting

Install or replace the battery for transmitter:

Caution: Turn off the electrical devices and disconnect

the supply to the appliances before replacing the

batteries. Replace only with the same or equivalent

type of batteries. Do not dispose the used batteries

with household waste. Refer to your local area for the

proper disposal.

Figure1

1. Pull out the battery drawer

2. Place the new batteries according to the marking on

the battery drawer.

3. Dispose the old batteries properly.

4. Slide the battery drawer back to its position.

5. Check if the thermostat works properly or not. Press

Normal

Temporary Override

Override

Normal ...

Selecting the Temporary/ Permanent Override Mode

1. Press <

> to change the mode from normal to

Temporary Override.

2. Press <

> again, the mode changes from Temporary

Override to Permanent Override mode.

displayed.

3. Press <

> once, the mode changes from Permanent

Override to normal mode.

Review and adjust the Override temperature:

1. Press < >, < > the Override temperature is shown.

2. Hold the< >, < > for 2 seconds, the Override

temperature will flash.

3. Press < >, < > to adjust the Override temperature.

4. Press <

> to exit the Override temperature setting.

Or transmitter will auto-return to normal mode after 10

seconds.

Permanent

icon will be displayed.

icon will be