DaytonAudio HTA20 사용자 설명서 - 페이지 8

{카테고리_이름} DaytonAudio HTA20에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio HTA20 8 페이지. 20w integrated stereo hybrid tube amplifier

Specifi cations

Maximum Power Output (Peak) .............. 45W x 2 @ 4 Ohm

RMS Power Output .................................. 15W RMS x 2 @ 4 Ohm

Total Gain: ................................................ 28 dB

Total Harmonic Distortion ....................... <0.5% @ Maximum Rated Output

Frequency Response .............................. 20 Hz – 20,000 Hz ( 1 db)

Input Sensitivity ....................................... 315 mV

Channel Separation ................................. 53 dB

Minimum Speaker Impedance ................ 4 Ohm

Signal To Noise Ratio .............................. 75 dB

Digital Section

PC-USB ..................................................... up to 192 kHz 32 Bit

Bluetooth .................................................. 5.0

General

Power Requirement ................................. 100V-240V, 60/50 Hz

Standby Power Consumption ................ 8W

Preamplifi er Tubes .................................. 6F1 x 2

Amplifi cation ............................................ Class A/B

Dimensions (W, H, D) .............................. 9.2 x 6.2 x 4.2 in. (234 x 157 x 107 mm)

Weight ....................................................... 2.55 lbs. / 1.15 kg

All Specifi cations are accurate at the time of printing.

Dayton audio reserved the right to make improvements without notice.

Dayton Audio products are warranted to be free of all defects in material and workmanship for 5

YEARS from the date of purchase from an authorized Dayton Audio dealer. This warranty and all

rights provided are limited to the original owner and are non-transferable. Responsibility is limited

to replacement or repair as set forth in this warranty statement.

Should a product require warranty service during this period, Dayton Audio will repair or replace

without charge, any part or product proving defective in material or workmanship. All warranty

repairs and service must be performed by an authorized Dayton Audio technician or service

facility. The use of non-authorized repair services renders this warranty null and void, and any

charges relating to non-authorized repair are the responsibility of the product owner.

All expenses (except return shipping costs) related to replacing or repairing a defective part or

product under this warranty shall be assumed by Dayton Audio. Dayton Audio reserves the right

to replace defective product with a new or factory reconditioned unit.

For more information and to register your new Dayton Audio device visit daytonaudio.com.

Dayton Audio

daytonaudio.com

tel + 937.743.8248

705 Pleasant Valley Dr.

Springboro, OH 45066

USA

Last Revised: 2/23/2023