DaytonAudio HTA20 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач DaytonAudio HTA20. DaytonAudio HTA20 8 сторінок. 20w integrated stereo hybrid tube amplifier
Друкувати сторінку
Specifi cations
Maximum Power Output (Peak) .............. 45W x 2 @ 4 Ohm
RMS Power Output .................................. 15W RMS x 2 @ 4 Ohm
Total Gain: ................................................ 28 dB
Total Harmonic Distortion ....................... <0.5% @ Maximum Rated Output
Frequency Response .............................. 20 Hz – 20,000 Hz ( 1 db)
Input Sensitivity ....................................... 315 mV
Channel Separation ................................. 53 dB
Minimum Speaker Impedance ................ 4 Ohm
Signal To Noise Ratio .............................. 75 dB
Digital Section
PC-USB ..................................................... up to 192 kHz 32 Bit
Bluetooth .................................................. 5.0
General
Power Requirement ................................. 100V-240V, 60/50 Hz
Standby Power Consumption ................ 8W
Preamplifi er Tubes .................................. 6F1 x 2
Amplifi cation ............................................ Class A/B
Dimensions (W, H, D) .............................. 9.2 x 6.2 x 4.2 in. (234 x 157 x 107 mm)
Weight ....................................................... 2.55 lbs. / 1.15 kg
All Specifi cations are accurate at the time of printing.
Dayton audio reserved the right to make improvements without notice.
Warranty
Dayton Audio products are warranted to be free of all defects in material and workmanship for 5
YEARS from the date of purchase from an authorized Dayton Audio dealer. This warranty and all
rights provided are limited to the original owner and are non-transferable. Responsibility is limited
to replacement or repair as set forth in this warranty statement.
Should a product require warranty service during this period, Dayton Audio will repair or replace
without charge, any part or product proving defective in material or workmanship. All warranty
repairs and service must be performed by an authorized Dayton Audio technician or service
facility. The use of non-authorized repair services renders this warranty null and void, and any
charges relating to non-authorized repair are the responsibility of the product owner.
All expenses (except return shipping costs) related to replacing or repairing a defective part or
product under this warranty shall be assumed by Dayton Audio. Dayton Audio reserves the right
to replace defective product with a new or factory reconditioned unit.
For more information and to register your new Dayton Audio device visit daytonaudio.com.
Dayton Audio
®
daytonaudio.com
tel + 937.743.8248
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
Last Revised: 2/23/2023