DaytonAudio HTA200BT 사용자 설명서 - 페이지 8

{카테고리_이름} DaytonAudio HTA200BT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio HTA200BT 12 페이지. 200w integrated stereo hybrid tube amplifier

Connecting Sources

CD PLAYER

The HTA200 is capable of receiving signals directly from a wide variety of sources. Using high quality cables will

ensure the best possible transmission from your connected devices.

Connecting a Turntable

The HTA200 is capable of connecting directly to most turntables without the addition of an external phono preamplifier.

1. Ensure that your turntable is set to output a phono signal. Many modern turntables have the ability to output

either a line level signal or a phono signal. If your turntable is set to output a line level signal please connect it

to the AUX input on the HTA200.

2. Remove the covers from the PHONO RCA plugs and connect the turntable to the phono input.

3. Connect the ground wire of the turntable to the ground terminal on the rear of the HTA200 (if applicable).

Bluetooth as a Source

1. Connect the Bluetooth antenna to the BT ANTENNA port on the rear of the unit. Also make sure that the

Bluetooth input is selected on the HTA200.

2. Using a smart phone, tablet, computer, or other device capable of transmitting Bluetooth audio, go the

devices settings and scan for available Bluetooth devices.

3. Look for and select "HTA200" in the device list and begin pairing. The front display panel on the HTA200 will

flash until a device is paired.

4. Once the front display panel stops flashing and your device indicates that you are connected you can begin

streaming your favorite music from up to 30 feet away.

WBA51

TURNTABLE