HiBoost F10G-CP 사용자 설명서 - 페이지 11

{카테고리_이름} HiBoost F10G-CP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBoost F10G-CP 20 페이지. Cellular 3g signal booster

indoor and outdoor antennas.

2. Never point the front of the yagi donor (outdoor) antenna towards the inside of

the server (outdoor)antenna.

3. Verify that the supplied coaxial cables from both the donor (outdoor) antenna

and the server (outdoor)antenna are properly connected to the cellular booster

before powering it up.

4. Carefully plug in the supplied power adaptor into the back of the cellular booster

where it is marked 'power' and connect the other end to a power outlet.

The LED indicator marked power should light up green.

3.9 Check the Cellular Booster Status

Your cellular booster comes equipped with electronic sensors designed

to identify cellular signal overload or oscillation which can hinder signal

boosting performance. Your cellular booster is specially designed to

automatically decrease gain to compensate for these circumstances. The

device also has a feature to automatically shut down in case of excessive

oscillation. Improper equipment installation and unusable signal quality

can cause oscillation, this is why it is important to fully understand the

LED alarm lights on your booster, as they will help you identify and solve

any potential issues.

The color of the LED indicates the status of the booster system.