HiBoost F10G-CP Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Amplificador de sinal HiBoost F10G-CP. HiBoost F10G-CP 20 páginas. Cellular 3g signal booster
Imprimir páginaindoor and outdoor antennas.
2. Never point the front of the yagi donor (outdoor) antenna towards the inside of
the server (outdoor)antenna.
3. Verify that the supplied coaxial cables from both the donor (outdoor) antenna
and the server (outdoor)antenna are properly connected to the cellular booster
before powering it up.
4. Carefully plug in the supplied power adaptor into the back of the cellular booster
where it is marked 'power' and connect the other end to a power outlet.
The LED indicator marked power should light up green.
3.9 Check the Cellular Booster Status
Your cellular booster comes equipped with electronic sensors designed
to identify cellular signal overload or oscillation which can hinder signal
boosting performance. Your cellular booster is specially designed to
automatically decrease gain to compensate for these circumstances. The
device also has a feature to automatically shut down in case of excessive
oscillation. Improper equipment installation and unusable signal quality
can cause oscillation, this is why it is important to fully understand the
LED alarm lights on your booster, as they will help you identify and solve
any potential issues.
The color of the LED indicates the status of the booster system.