DaytonAudio QS204-4 사용자 설명서 - 페이지 4

{카테고리_이름} DaytonAudio QS204-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio QS204-4 5 페이지. 70v commercial speaker pair

페이지 인쇄

Caring For Your Speakers

The two most common ways that loudspeakers are permanently damaged:

Not enough power at higher volumes.

Too much power at higher volumes.

Contrary to conventional wisdom, far more speakers are damaged as a result of under-powering, than by overpowering. When an amplifier runs out of

power, it still tries to reproduce the musical signal by "clipping" the waveform. At high volume levels this clipping sends extreme amounts of distortion

energy to the speaker, eventually destroying it. If the sound from your speakers starts to sound distorted, turn down the volume.

Having plenty of reserve power will help your speakers reproduce dynamic contrasts and quick transients of music much more effectively, but use good

judgment; too much power will also permanently damage a speaker. Again, if you hear distortion or audible distress, turn the volume down.

The QS204-4 speakers are designed to withstand outdoor environments, including incidental exposure to water. They are not designed to be washed us-

ing a pressure washer or hose nozzle. If debris accumulates on the housing of the speaker, use a damp sponge or cloth to remove it. This product is not

suitable for washdown duty or locations requiring explosion-proof electrical hardware.

Dayton Audio

products are designed and constructed by industry experts, and are thoroughly tested before shipment. Dayton Audio products are warranted for the period

of five years. This warranty is limited to manufacturer defects, either in materials or workmanship. Dayton Audio is not responsible for any consequential on inconsequential

damage to any other unit or component or the cost for installation or extraction of any component of the audio system. In the rare case of a product failure, please contact

your place of purchase or call our Customer Support Department at (937) 743-8248.

There are no other warranties, either express or implied, which extend the foregoing, and there are no warranties of merchantability or fitness for any particular purpose.

The warranty will not cover incidental or consequential damage due to defective or improper use of products, including abuse or environmental damage.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Non-Warranty Service: If non-warranty service is required, the product may be sent to the Company for repair/replacement, transportation prepaid, by calling (937) 743-8248

for details, complete instructions, and service fee charges.

QS204-4

Model Number

Description

Woofer

Tweeter

Frequency Response

Impedance

70V Taps

Power Handling (RMS/Peak)

SPL 1W/1m

Dimensions HxWxD

Color

Weight

Ingress Protection (IP) Rating

Warranty Information

daytonaudio.com

Designed and Engineered in USA

PO Box 636 • Springboro, OH • 45066 • Phone: (937) 743-8248

Specifications

QS204-4

Commercial Indoor/Outdoor Speaker

(2) 4" Mineral-Filled Polypropylene

1" Treated Silk Dome

70-20,000 Hz

4 Ohms/70V

40W/20W/10W/5W/4 Ohms

40W / 75W

87 dB

5.4" x 15.2" x 10.3"

Black Only

7.5 lb / 3.4 kg

IP 51

Warranty Limitations

(4)

Last Revised: 8/30/2013