GAI-Tronics 1090 설치 및 사용자 설명서 - 페이지 6
{카테고리_이름} GAI-Tronics 1090에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 1090 20 페이지. Hands-free telephones vandal resistant (vr) and help point
페이지 인쇄
competent personnel. Where the telephone faceplate is mounted into an
enclosure or recess other than the standard GAI-Tronics backbox, then
additional care must be taken that wiring and proximity to conducting surfaces
complies with the requirements of the R&TTE Directive - 1999/5/EC.
Contact GAI-Tronics if installation service is required.
From a mounting and installation point of view, VR and Help Point products
are identical.
5.2. Wall/Pole Mounting
When wall or pole mounted, VR and Help Point units must be fitted inside a
dedicated rear enclosure.
Before mounting the telephone, check the cable routing and requirements. If
glands are required, fit them to the case as follows:
1. Remove the RED blanking plug leaving the other (usually BLACK) in
place.
Only fit a second gland if a separate cable is required to the phone (for
example for an additional hook contact).
2. Select the appropriate sized gland:
Use the smaller gland for cables
diameters 4 - 7mm.
Use the larger gland for cable
diameters 8 - 13mm.
3. From the outside of the case, insert
the selected gland into the threaded
6
VR & Help Point