GAI-Tronics 1090 설치 및 사용자 설명서 - 페이지 9

{카테고리_이름} GAI-Tronics 1090에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 1090 20 페이지. Hands-free telephones vandal resistant (vr) and help point

페이지 인쇄

5.3. Flush mounting

To flush-mount the telephone to a wall:

1. Prepare a recess (at least 50mm deep) in the wall according to the

dimensions shown.

2. Mark the wall with hole centres based on the dimensions shown

(155 x 326mm). If necessary offer the faceplate up to the wall to

check alignment. Do not use the telephone as a template for

drilling.

3. Drill holes in the wall at the marked positions. Select appropriate

screws, wall plugs etc., for the type of wall, bearing in mind that the

weight of the complete phone is around 1.5kg.

4. Route the cable to within the recess, and make connections to the

telephone as shown in section 6.

Secure the telephone to the wall taking care not to trap any wires. Note

that the gasket on the rear of the faceplate is intended to make a

weather seal when compressed against a smooth surface. Do not rely

on this gasket to keep water out if mounting directly to rough surfaces

such as brickwork – in these cases use additional sealant around the

edges to ensure a weatherproof seal.

VR & Help Point