Hiboy VE1 PRO 사용자 설명서 - 페이지 7

{카테고리_이름} Hiboy VE1 PRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hiboy VE1 PRO 10 페이지. 16" electric scooter
Hiboy VE1 PRO에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)

페이지 인쇄

7. Usage

How to Operate

Do not activate the throttle unless you are on the electric scooter and in a safe, outdoor

environment suitable for riding.

How to Ride

1.Once you have charged the battery Long press the power button to turn it on; and place both hands on the handlebars.

2. Place both hands on the handlebars and place one foot on deck plate. Push scooter forward with other foot while applying the

throttle with right hand. Place other foot on deck plate once scooter is in motion.

How to start Cruise Control?

1. Press the upshift and downshift key to switch to the setting interface at same time.

2. Press the middle button(power button) to add speed up to 17mph

3. 0000 shows the Cruise Control is off; 0001 shows the Cruise Control is on. (Press the up or down key to switch 0000/0001)

Note:

Once cruise control is started, if you need to stop the brake in the process of moving, please first press the throttle to interrupt

cruise control mode, and then squeeze the brake. (It's safer for you. Especially at higher speeds)

How to Stop

1.To stop, release the throttle and apply the brake, by squeezing the brake lever, until the product comes to a complete stop.

2.Long press the power button again to turn it off after your ride is complete.

How to turn the headlight/taillight on/oﬀ?

1. Long press the upshift button to turn it on

2. Long press the upshift button again to turn it off.

Note:Taillight ﬂashing when braking

Need Help? Please search "Hiboy us" on Youtube website to find our Channel. You can watch the Installation video of VE1 PRO.

Or contact Hiboy after-sale team by email: [email protected].

8. Pre-Ride Checklist

Brake Check the brake for proper function. When you squeeze the brake lever, the brake should provide positive braking

action. Make sure brake is not rubbing when the lever is released. When you apply the brake with the throttle on/engaged,

the brake cut-off switch should cut power to the motor.

Wheels Periodically inspect the wheels for excessive wear.

Tires Periodically inspect the tires for excess wear and replace as needed. Regularly check the tire pressure and inflate as needed.

Frame, Fork and Handlebars Check for cracks or broken connections. Although broken frames are rare, it is possible for

an aggressive rider to run into a curb or object and wreck, bend or break a frame. Get in the habit of inspecting your scooter

on a regular basis.

Hardware/Loose Parts Before every ride, check all parts, such as nuts, bolts, fasteners, etc., to ensure they are secure and

assembled correctly. There should not be any unusual rattles or sounds from loose parts or broken components. If you cannot

solve the abnormal sound problem, please contact Hiboy after-sales team immediately. Our email is [email protected].

Safety Gear Always wear proper protective equipment, such as an approved safety helmet (with chin strap securely buckled), elbow

pads, and kneepads. A helmet may be legally required by local law or regulation in your area. A long-sleeved shirt and long pants are

recommended. Always wear shoes and keep shoelaces tied and out of the way of the wheels and motor and drive system. NEVER

RIDE BAREFOOTED OR IN SANDALS.

Laws and Regulations Always check and obey any local laws or regulations.

Insurance

Do not assume that your existing insurance policies necessarily provide coverage for product use.

Check with your insurance company for information regarding insurance.

Storage

Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.