GAI-Tronics ILC-1117 설치 및 사용자 설명서 - 페이지 8

{카테고리_이름} GAI-Tronics ILC-1117에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics ILC-1117 20 페이지. Titan illuminated crossing telephone

WARNING:.Your warranty will be invalidated if :-

1. Any fixing hole made in the rear enclosure is left unused.

2. Any additional holes are drilled into the telephone enclosure.

3. Plastic bushes are not used on all fixing holes.

2. Mark the wall with hole centres based on the dimensions shown

(145 x 270mm). If necessary offer the rear enclosure up to the wall

to check alignment. Do not use the enclosure as a template for

drilling.

3. Drill holes in the wall on the marked positions. Select appropriate

screws, wall plugs etc., for the type of wall, bearing in mind that the

weight of the complete phone is around 5kg.

IMPORTANT: Check that screws seat properly in the plastic bushes to

ensure a watertight seal. Do not use excessive tightening force, as

this may crack the case.

4. Ensure that all four plastic flanged bushes are in place and the rear

enclosure is screwed tightly to the surface to prevent any water

ingress through the punched holes.

5. Complete the installation by making the appropriate connections

(section 5) and re-fitting the face plate.

4.4. Pole mounting

ILC-1117 Titan Illuminated Crossing Telephone