GAI-Tronics ILC-1117 Manual de instalação e do utilizador - Página 8
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Telefone GAI-Tronics ILC-1117. GAI-Tronics ILC-1117 20 páginas. Titan illuminated crossing telephone
Imprimir página
WARNING:.Your warranty will be invalidated if :-
1. Any fixing hole made in the rear enclosure is left unused.
2. Any additional holes are drilled into the telephone enclosure.
3. Plastic bushes are not used on all fixing holes.
2. Mark the wall with hole centres based on the dimensions shown
(145 x 270mm). If necessary offer the rear enclosure up to the wall
to check alignment. Do not use the enclosure as a template for
drilling.
3. Drill holes in the wall on the marked positions. Select appropriate
screws, wall plugs etc., for the type of wall, bearing in mind that the
weight of the complete phone is around 5kg.
IMPORTANT: Check that screws seat properly in the plastic bushes to
ensure a watertight seal. Do not use excessive tightening force, as
this may crack the case.
4. Ensure that all four plastic flanged bushes are in place and the rear
enclosure is screwed tightly to the surface to prevent any water
ingress through the punched holes.
5. Complete the installation by making the appropriate connections
(section 5) and re-fitting the face plate.
4.4. Pole mounting
8
ILC-1117 Titan Illuminated Crossing Telephone