HiBy R6III 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} HiBy R6III에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBy R6III 3 페이지.
페이지 인쇄Operating System
The R6III sports a lightly customized Android 12 operating system which may be operated in the
same way as most smartphones, including the installation of 3rd party audio and general apps and
use of the Play Store;
Music player app
Preloaded with HiByMusic Professional edition, specially customized for HiFi digital audio players
for powerful features, perfect sound and ease of use;
Micro SD card installation
Micro SD Card sizes of up to 2TB are accepted.
Charging
PD2.0 is supported.
3.5mm and 4.4mm line out
Auto line out mode switch: the device automatically detects when it is connected to an amplifier
rather than headphones and switches automatically to Line Out mode.
RGB LED
1.The LED on the R6III power button doubles as an indicator light for the audio format being sent to
the DAC:
2.
MQA—green
MQA studio—blue
MQA core(MQB)—magenta
Not playing—pale blue
PCM:
48kHz and under—yellow
64-192kHz—cyan blue
>192kHz—orange
All DSD: white
Coaxial digital audio output
The R6 III supports coaxial digital output via its type-c port. This may be adapted to regular RCA
connectors via our Type-C->RCA interconnect, available at store.hiby.com or one of the various
retail partners listed at the end of this document.
USB Digital audio output
Connect USB DAC / amps to the R6III USB type-C port.
File transfer: connect the R6III to the computer via the provided USB type-C cable. After this, pull
down the notification shade on the R6III, scroll down to the bottom and tap twice on "USB for
charging", then select "File transfer" in the menu. Now the R6III will function as an MTP storage
device for file transfer. On a Mac it is necessary to also install Android File Transfer to enable MTP
file transfer.
Acting as USB DAC
a.connect the R6III to the computer via the provided USB type-C cable. After this, pull down the
notification shade on the R6III, scroll down to the bottom and tap twice on "USB for charging", then
select "USB DAC in" in the menu.
b.On windows 7 it would be necessary to install the USB audio driver for this; go to store.hiby.com -
> Scroll to bottom -> Click "download" under Support -> "USB DAC Driver & Guidance" -> "HiBy
R6III USB DAC Driver Download and Installation Guide"
Wireless connectivity
1.Bluetooth5.0
Connect the R6III with new Bluetooth audio devices as follows:
a.Pull down the notification shade then pull down again to expand the list of quick status indicator
buttons; press and hold on the Bluetooth icon to enter the Bluetooth setup screen;
b.Turn on the Bluetooth master switch;
c.Tap "Pair new device" to search for nearby Bluetooth devices (set the Bluetooth device to be
paired to broadcast or pairing mode according to its instructions)
d.Tap on the name of your Bluetooth device on the R6III to pair with it; once successfully paired, it
will appear under the list of "paired devices".
2.WiFi
The R6III supports both 2.4GHz and 5Hz WiFi. Apart from using it to connect it to the internet for
music streaming, internet etc., it can also be used for music transfer, remote control via HiByLink
and/or playing music from network resources via DLNA / LAN etc.
Fireware update
Over-the-air online update
1.Updating automatically via WiFi isrecommended.