HiBy R6III Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Media Player HiBy R6III. HiBy R6III 3 pages.

Print Page

Operating System

The R6III sports a lightly customized Android 12 operating system which may be operated in the

same way as most smartphones, including the installation of 3rd party audio and general apps and

use of the Play Store;

Music player app

Preloaded with HiByMusic Professional edition, specially customized for HiFi digital audio players

for powerful features, perfect sound and ease of use;

Micro SD card installation

Micro SD Card sizes of up to 2TB are accepted.

Charging

PD2.0 is supported.

3.5mm and 4.4mm line out

Auto line out mode switch: the device automatically detects when it is connected to an amplifier

rather than headphones and switches automatically to Line Out mode.

RGB LED

1.The LED on the R6III power button doubles as an indicator light for the audio format being sent to

the DAC:

MQA—green

MQA studio—blue

MQA core(MQB)—magenta

Not playing—pale blue

PCM:

48kHz and under—yellow

64-192kHz—cyan blue

>192kHz—orange

All DSD: white

Coaxial digital audio output

The R6 III supports coaxial digital output via its type-c port. This may be adapted to regular RCA

connectors via our Type-C->RCA interconnect, available at store.hiby.com or one of the various

retail partners listed at the end of this document.

USB Digital audio output

Connect USB DAC / amps to the R6III USB type-C port.

File transfer: connect the R6III to the computer via the provided USB type-C cable. After this, pull

down the notification shade on the R6III, scroll down to the bottom and tap twice on "USB for

charging", then select "File transfer" in the menu. Now the R6III will function as an MTP storage

device for file transfer. On a Mac it is necessary to also install Android File Transfer to enable MTP

file transfer.

Acting as USB DAC

a.connect the R6III to the computer via the provided USB type-C cable. After this, pull down the

notification shade on the R6III, scroll down to the bottom and tap twice on "USB for charging", then

select "USB DAC in" in the menu.

b.On windows 7 it would be necessary to install the USB audio driver for this; go to store.hiby.com -

> Scroll to bottom -> Click "download" under Support -> "USB DAC Driver & Guidance" -> "HiBy

R6III USB DAC Driver Download and Installation Guide"

Wireless connectivity

1.Bluetooth5.0

Connect the R6III with new Bluetooth audio devices as follows:

a.Pull down the notification shade then pull down again to expand the list of quick status indicator

buttons; press and hold on the Bluetooth icon to enter the Bluetooth setup screen;

b.Turn on the Bluetooth master switch;

c.Tap "Pair new device" to search for nearby Bluetooth devices (set the Bluetooth device to be

paired to broadcast or pairing mode according to its instructions)

d.Tap on the name of your Bluetooth device on the R6III to pair with it; once successfully paired, it

will appear under the list of "paired devices".

2.WiFi

The R6III supports both 2.4GHz and 5Hz WiFi. Apart from using it to connect it to the internet for

music streaming, internet etc., it can also be used for music transfer, remote control via HiByLink

and/or playing music from network resources via DLNA / LAN etc.

Fireware update

Over-the-air online update

1.Updating automatically via WiFi isrecommended.