Greatneck 80161 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Greatneck 80161에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Greatneck 80161 18 페이지. High speed circular saw
페이지 인쇄
!
WARNING:
eyewear can cause serious injury if
broken during operation of a power tool.
!
WARNING:
mask and hearing protection when
sawing.
Use only in well ventilated areas. Using
personal safety devices and working in a
safe environment reduces risk of injury.
Hold the tool by insulated gripping
surfaces when performing an operation
where the saw blade may contact hidden
wiring or its own cord. Contact with a "live"
wire will make exposed metal parts of the
tool "live" and shock the operator.
Always hold the tool with two hands.
Attempting to control the tool with only one
hand is dangerous. It could result in loss of
control and serious injury.
Always make sure the work surface is
free from nails and other foreign
objects. Cutting into a nail can cause the
blade and the tool to jump and damage the
blade.
Never hold the workpiece in one hand
and the tool in the other hand when
sawing. Never place your hands near or
below the cutting surface. Clamping the
material and guiding the tool with both
hands is much safer.
SPECIFIC SAFETY RULES
Non-compliant
Always use a dust
SAVE THESE INSTRUCTIONS FOR REFERENCE
Always make sure the blade guard is
functioning properly. A broken guard may
cause serious injury.
Never lay workpiece on hard surfaces
like concrete, stone, etc. The protruding
blade may cause tool to jump.
!
DANGER:
accidental starting, always remove the
plug from the power source before
making any adjustments and before
installing or removing a saw blade.
When replacing the blade, make sure the
replacement blade is 7¼" in diameter
and is rated for at least 7,000 RPM.
Installing an incorrect blade will result in
possible injury and poor cutting action.
After changing a blade or making
adjustments, make sure the blade clamp
screw is securely tightened. Loose
blades and adjustment devices will be
violently thrown.
Never use dull or damaged blades.
Sharp blades must be handled with care.
Damaged blades can snap during use. Dull
blades require more force to cut the
workpiece, possibly causing the blade to
break.
Never touch the blade during or
immediately after use. After use the blade
is too hot to be safely touched with bare
hands.
6
To avoid injury from