Greatneck 80161 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Greatneck 80161. Greatneck 80161 18 pagina's. High speed circular saw

Pagina afdrukken

WARNING:

eyewear can cause serious injury if

broken during operation of a power tool.

WARNING:

mask and hearing protection when

sawing.

Use only in well ventilated areas. Using

personal safety devices and working in a

safe environment reduces risk of injury.

Hold the tool by insulated gripping

surfaces when performing an operation

where the saw blade may contact hidden

wiring or its own cord. Contact with a "live"

wire will make exposed metal parts of the

tool "live" and shock the operator.

Always hold the tool with two hands.

Attempting to control the tool with only one

hand is dangerous. It could result in loss of

control and serious injury.

Always make sure the work surface is

free from nails and other foreign

objects. Cutting into a nail can cause the

blade and the tool to jump and damage the

blade.

Never hold the workpiece in one hand

and the tool in the other hand when

sawing. Never place your hands near or

below the cutting surface. Clamping the

material and guiding the tool with both

hands is much safer.

SPECIFIC SAFETY RULES

Non-compliant

Always use a dust

SAVE THESE INSTRUCTIONS FOR REFERENCE

Always make sure the blade guard is

functioning properly. A broken guard may

cause serious injury.

Never lay workpiece on hard surfaces

like concrete, stone, etc. The protruding

blade may cause tool to jump.

DANGER:

accidental starting, always remove the

plug from the power source before

making any adjustments and before

installing or removing a saw blade.

When replacing the blade, make sure the

replacement blade is 7¼" in diameter

and is rated for at least 7,000 RPM.

Installing an incorrect blade will result in

possible injury and poor cutting action.

After changing a blade or making

adjustments, make sure the blade clamp

screw is securely tightened. Loose

blades and adjustment devices will be

violently thrown.

Never use dull or damaged blades.

Sharp blades must be handled with care.

Damaged blades can snap during use. Dull

blades require more force to cut the

workpiece, possibly causing the blade to

break.

Never touch the blade during or

immediately after use. After use the blade

is too hot to be safely touched with bare

hands.

To avoid injury from