Hickok WAEKON FPT2600 사용자 설명서 - 페이지 12

{카테고리_이름} Hickok WAEKON FPT2600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hickok WAEKON FPT2600 16 페이지. I/m handheld fuel cap test system

Chapter

Step 2—Setup

1. Remove the fuel cap from the vehicle and inspect for the following:

• Damage to the fuel cap—if damaged, replace with new cap

• Cracked or missing gasket—if damaged or missing, replace with a

new gasket.

• Dirty gasket—clean gasket or replace if necessary

IMPORTANT! Allow any fuel on the cap to evaporate before continuing.

2. Connect the appropriate

adapter to the tester's

quick disconnect fitting.

Remember, do not attach the

fuel cap until after the tester

is turned on.

3. Push the PRESS TO START

button to turn the tester on.

The LEDs will light in the following order:

• All LEDs will light briefly.

• The green PASS LED will turn on to indicate the auto zero function is

running, and then turns off.

• The red READY LED turns on indicating the tester has auto zeroed

and the unit is ready for testing.

4. Immediately install the fuel

cap on to the adapter to

begin testing. Make sure the

cap is firmly seated

Note: If testing is not started

within 20 seconds after auto

zero, the tester will turn off. If this happens, remove the cap and return to

the beginning of the setup procedure and start again.

12 FPT2600-EX1 User Guide