Dynalink RTA1335 빠른 설정 매뉴얼 - 페이지 5
{카테고리_이름} Dynalink RTA1335에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalink RTA1335 16 페이지. Adsl2+ 4-port modem router
Dynalink RTA1335에 대해서도 마찬가지입니다: 브로셔 및 사양 (3 페이지)
페이지 인쇄ADSL 2+ 4-Port Modem Router Quick Set-up Guide
5
Getting On-line
Before you start, the DSL & Ethernet lights on the router must be on. Refer to
Section 10 – Troubleshooting of this Guide to resolve any issues.
STEP 1
GO TO THE 'CONNECT TO INTERNET' PAGE
Start your web browser. Enter the
default address http://192.168.1.1.
Type admin for both User name and
Password.
See Q1 in Section 10 - Troubleshooting
if you cannot get this screen.
Next you will be in the Quick Start >
Connect to Internet page.
If your ISP specifies that your ADSL
service is PPPoE, you must now follow
Section 6 to change connect mode to
PPPoE. Check with your ISP if you are unsure.
STEP 2
ENTER INTERNET ACCOUNT DETAILS
Enter your Internet account User Name & Password in the exact format as
specified by the ISP. Usually the user name resembles an e-mail address with
suffix @isp.co.nz. Make sure the page displays "Your DSL router is ready to
connect", before clicking Connect.
See Q2 in Section 10 – Troubleshooting, if after several minutes the message
"Your DSL router is not ready to connect" still shows.