Dynalink RTA1335 Handleiding voor snelle installatie - Pagina 5

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Dynalink RTA1335. Dynalink RTA1335 16 pagina's. Adsl2+ 4-port modem router
Ook voor Dynalink RTA1335: Brochure & specificaties (3 pagina's)

Pagina afdrukken

ADSL 2+ 4-Port Modem Router Quick Set-up Guide

Getting On-line

Before you start, the DSL & Ethernet lights on the router must be on. Refer to

Section 10 – Troubleshooting of this Guide to resolve any issues.

STEP 1

GO TO THE 'CONNECT TO INTERNET' PAGE

Start your web browser. Enter the

default address http://192.168.1.1.

Type admin for both User name and

Password.

See Q1 in Section 10 - Troubleshooting

if you cannot get this screen.

Next you will be in the Quick Start >

Connect to Internet page.

If your ISP specifies that your ADSL

service is PPPoE, you must now follow

Section 6 to change connect mode to

PPPoE. Check with your ISP if you are unsure.

STEP 2

ENTER INTERNET ACCOUNT DETAILS

Enter your Internet account User Name & Password in the exact format as

specified by the ISP. Usually the user name resembles an e-mail address with

suffix @isp.co.nz. Make sure the page displays "Your DSL router is ready to

connect", before clicking Connect.

See Q2 in Section 10 – Troubleshooting, if after several minutes the message

"Your DSL router is not ready to connect" still shows.