Dynalink RTA220 빠른 설정 매뉴얼 - 페이지 4

{카테고리_이름} Dynalink RTA220에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalink RTA220 16 페이지.

Ethernet (via a network hub to a LAN)

Connect using the enclosed "straight through" Ethernet cable to the UPLINK

port of the network hub. If the hub does not have an UPLINK port, connect

using a "cross-over" Ethernet cable to any other port of the network hub.

Cross-over Ethernet cable is not provided.

USB (for standalone Windows 98/ME/2000/XP computers)

Connecting the Router via Ethernet is the preferred option. However if you

decide to connect via the USB port, you must install the USB drivers for this

Router. The drivers are found on the enclosed CDROM. Please refer to Chapter

2: Installation on the User's Manual for step-by-step instructions.

Connect the ADSL Router

Connect the 12V 1A DC power adapter to the PWR jack of the Router, and

plug the adapter into a mains power outlet. Switch on the Router.

Connect the DSL port of the Router to your ADSL jackpoint (telephone wall

socket) with the enclosed phone line cord. Never connect the ADSL Router

through a Microfilter.

Connect the LAN port of the Router to the Ethernet port of your computer (or

uplink port of a network hub) using the Ethernet cable provided. If you have

chosen to connect via the USB port, connect the USB port of the Router to

the USB port of your computer (or USB hub) using the USB cable provided.

After connecting the cable (LAN or USB), the corresponding light on the front

panel of the Router will turn on. If not, it indicates a problem with the Ethernet

or USB connection. Refer to Section 10 – Troubleshooting.

Configure your computer

For a step-by-step guide refer to Chapter 4 - Configuration in the User's Manual.

The description below assumes you are connecting via an Ethernet port.

By default the DHCP server on your ADSL Router is enabled. The simplest

configuration method is to follow option 1 below.

STEP 1

You do not need to specify an IP address when configuring TCP/IP properties.

If your computer stands alone and is set up to obtain an IP address automatically,

you can move on to Section 5 – Going On-Line.

OBTAIN AN IP ADDRESS FROM THE ADSL ROUTER