Dynalink RTA220 빠른 설정 매뉴얼 - 페이지 3

{카테고리_이름} Dynalink RTA220에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalink RTA220 16 페이지.

페이지 인쇄

ADSL Router Quick Set-up Guide

Default Configuration for New Zealand

This Router is shipped with the following factory default settings.

Router IP address

Subnet mask

VPI

VCI

Encapsulation

NAT

DSL line mode

WAN IP

DHCP

UPnP IGD

Security:

Firewall

Intrusion Detection

Router configuration & management:

Administrative User name

Administrative Password

Telnet password

Users must not change the VPI, VCI, Encapsulation or NAT settings. DSL line

mode can be set to either auto or G.dmt. Advanced users who have other setup

preferences should refer to the User's Manual.

Before you start

Make sure your computer has the following installed:

An Ethernet or USB port (see 'Choose your connection option' below)

TCP/IP protocol

A web browser, Internet Explorer 5.0/Netscape 6 or better

Obtain the following information from your ISP:

Public IP address (Note: only required if you purchase a static IP)

DNS server IP address (if specified by ISP)

Choose your connection option:

Ethernet (for a standalone computer)

Connect using the enclosed "straight through" Ethernet cable.

192.168.1.1

255.255.255.0

100

PPPoA VC-MUX

enabled

auto

dynamic

enabled

disabled

off

disabled

admin

(do not change)