Dynalink RTA220 Manual de configuração rápida - Página 3
Procurar online ou descarregar pdf Manual de configuração rápida para Router de rede Dynalink RTA220. Dynalink RTA220 16 páginas.
Imprimir página
ADSL Router Quick Set-up Guide
1
Default Configuration for New Zealand
This Router is shipped with the following factory default settings.
Router IP address
Subnet mask
VPI
VCI
Encapsulation
NAT
DSL line mode
WAN IP
DHCP
UPnP IGD
Security:
Firewall
Intrusion Detection
Router configuration & management:
Administrative User name
Administrative Password
Telnet password
Users must not change the VPI, VCI, Encapsulation or NAT settings. DSL line
mode can be set to either auto or G.dmt. Advanced users who have other setup
preferences should refer to the User's Manual.
2
Before you start
Make sure your computer has the following installed:
An Ethernet or USB port (see 'Choose your connection option' below)
TCP/IP protocol
A web browser, Internet Explorer 5.0/Netscape 6 or better
Obtain the following information from your ISP:
Login user name and password
Public IP address (Note: only required if you purchase a static IP)
DNS server IP address (if specified by ISP)
Choose your connection option:
Ethernet (for a standalone computer)
Connect using the enclosed "straight through" Ethernet cable.
192.168.1.1
255.255.255.0
0
100
PPPoA VC-MUX
enabled
auto
dynamic
enabled
disabled
off
disabled
admin
admin
admin
(do not change)
(do not change)
(do not change)
(do not change)