HID FARGO DTC II 유지 관리 매뉴얼 - 페이지 9

{카테고리_이름} HID FARGO DTC II에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID FARGO DTC II 11 페이지.

Powering

Trusted Identities

2.3 Print head cleaning routine

Video link:

https://player.vimeo.com/video/679193550

The following diagram shows the location of the print head.

1. With the printer on, open the front door and remove the ribbon cartridge and set it aside.

2. Power off the printer and remove the power cord.

3. Remove the print head cleaning swab from the packaging.

4. Rub the swab back and forth over the print head terminal.

Repeat this a few times to wipe any debris from the print head.

5. Discard the swab as it is a one-time use item.

6. Close the front door.

7. Plug the power cord in and turn the printer on.

8. Re-install the ribbon into the printer.

PLT-06335, A.0

HID® FARGO® DTC™ii and DTCii Plus

Recommended Maintenance

February 2022