Dynalink RTA1046VW 구성 매뉴얼 - 페이지 5
{카테고리_이름} Dynalink RTA1046VW에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalink RTA1046VW 7 페이지. Adsl2+ wireless voip router
Dynalink RTA1046VW에 대해서도 마찬가지입니다: 사양 (3 페이지)
페이지 인쇄
Modem Configuration Guide
5. CONFIGURING WIRELESS (OPTIONAL)
Things you need to know before you begin:
- By default the RTA1046VW does not have wireless
security setup. We recommend that you follow the steps
below to set this us before you use wireless
- To use wireless be sure that you already have set up your
wireless adapter.
- To begin your wireless setup, you can connect your
computer to your router via Ethernet cable.
A. If you are still logged into your router, click on "Wireless"
in the top menu. If you are not logged in anymore use your
browser to go to 192.168.1.1 and login with admin
as the username and password (by default)
B. In the Basic settings, please check that you have
the below settings. Please take note of your SSID
(wireless network name)
C. Click on Apply
D. Click on the Security menu on the left
E. In the 'Wireless Security' drop down menu, select
"64-bit WEP" Click on Apply
Dynalink RTA1046VW
5