HID HDP 600ii 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} HID HDP 600ii에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID HDP 600ii 12 페이지.

Powering

Trusted Identities

2.1 Adhesive cleaning card routine

Video link:

https://player.vimeo.com/video/654620989

The following diagram shows the location where the cleaning card is inserted into the printer.

1. Remove the input hopper using the key; leave the key in place to keep the printer unlocked.

2. Open the front door and remove the film material from the printer.

3. Slide the film drawer in and close the front door.

4. Prepare the cleaning card by removing the adhesive backing paper.

5. Navigate through the onscreen menu to the Toolbox and select Clean Printer.

6. Manually feed the cleaning card into the feed rollers and into the printer.

The printer cleans itself and ejects the card into the output hopper.

7. Place the input hopper back in place.

8. Open the front door and re-install the film material.

9. Close the door and remove the key.

PLT-06360, A.0

HDP®600ii Recommended Maintenance

February 2022

Manual