HID HDP 600ii 유지 관리 매뉴얼 - 페이지 9
{카테고리_이름} HID HDP 600ii에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID HDP 600ii 12 페이지.
Powering
Trusted Identities
2.3 Film drive roller cleaning routine
Video link:
https://player.vimeo.com/video/654632842
The following diagram shows the location of the film drive roller.
1. Using the key, open the printer front door and slide out the film drawer.
2. Remove the film material.
3. Slide in the film drawer and close the front door.
4. Using the onscreen options, navigate to the Toolbox and select Cln Flm Roller.
5. Prepare an adhesive cleaning card by removing the paper backing.
6. Press the Start Cleaning button to start the film drive roller movement.
7. Hold the adhesive cleaning card with the adhesive backing paper removed up to the drive roller to clean it.
Repeat this a few times with different sections of the cleaning card until there is no debris left on the roller.
8. Discard the cleaning card as it is a one-time use item.
9. Re-install the film material.
10. Slide in the film drawer and close the front door.
PLT-06360, A.0
9
HDP®600ii Recommended Maintenance
February 2022
Manual