HID Aero X1100 설치 매뉴얼 - 페이지 7

{카테고리_이름} HID Aero X1100에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID Aero X1100 8 페이지. Intelligent controller

페이지 인쇄

Powering

Trusted Identities

Specifications

AERO X1100

Input Voltage

Maximum Input Current

Micro USB Port

Memory and Clock Backup Battery

microSD Card

Host Communication

IO Modules

Inputs

Output

READER INTERFACE

Power

Data Inputs

OSDP (RS-485) Mode

LED Output

Beeper Output

ENVIRONMENTAL

Operating Temperature

Storage Temperature

Humidity

MECHANICAL

Dimension

Weight

These specifications are subject to change without notice.

PLT-04233, Rev. A.3

12 to 24 V DC ±10%

1.9 A (550 mA excluding readers and USB)

5 V DC, 500 mA maximum (reserved for future use)

3 Volt Lithium, type CR2032

Format: microSD or microSDHC; 2GB to 8GB (reserved for future use)

Ethernet: 10Base T/100Base-TX

Micro-USB port (2.0)

Two independent ports: 2-wire RS-485, 2,400 to 115,200 bps, asynchronous,

half-duplex, 1 start bit, 8 data bits, and 1 stop bit

Seven unsupervised/supervised, standard EOL: 1k/1kΩ, 1%, ¼ watt

(Includes TAMPER, AC FAIL, and BATT FAIL inputs)

UL evaluation for access control use only

Four relays, Form-C with dry contacts:

Normally open contact (NO): 5 A @ 30 V DC resistive

Normally closed contact (NC): 3 A @ 30 V DC resistive

12 V DC ±10%, 500 mA maximum each reader

TTL compatible or 2-wire RS-485

9,600 to 230,400 bps, asynchronous, half-duplex, 1 start bit, 8 data bits,

and 1 stop bit. Maximum cable length: 2000 ft. (609.6 m)

Open collector, 12 V DC open circuit maximum, 40 mA sink maximum

32 to 158°F (0 to +70°C)

-67 to 185°F (-55 to +85°C)

5 to 85% RHNC

6.46" × 5.51" × 1.02" (164 mm × 140 mm × 26 mm)

352 g

HID Aero™ X1100 Installation Guide