HID MOD001 설치 매뉴얼 - 페이지 5

{카테고리_이름} HID MOD001에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID MOD001 11 페이지.

Powering

Trusted Identities

3. BEEKs and BluFi installation

3.1 BluFi installation

BluFi should be installed within 100ft (30m) of monitored

assets (shorter distances are required for environments

with obstructions).

• BluFi AC:

• BluFi DC:

BluFi DC

BluFi DC Plenum

PLT-06387, Rev. A.0

3.2 BLE Module

1. Place beacons near the desired assets (don't install yet).

2. In Bluzone console, go to BluFi > {BluFi Name} >

Statistics and scroll down to the Scan Map.

3. Verify that each beacon sees at least one BluFi. (-75

dBm or higher is desired). Move any BluFi, if necessary.

3.3 BLE Module installation

1. Connect the wired sensor (for your use-case) to the BLE

Module.

2. Power on the BLE Module using 3.6 - 30 VDC power

supply.

3. (Optional) Connect external antenna to the U.FL coaxial

connector.

4. BLE Modules should be mounted with screws to rigid

standoffs using the two through-holes on the printed

circuit board assembly (PCBA).

HID® MOD001

Install Guide

January 2022