HID MOD001 설치 매뉴얼

{카테고리_이름} HID MOD001에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID MOD001 11 페이지.

HID® MOD001

Install Guide

Overview

This BEEKs™ BLE Module Install Guide covers the basics of the setup and provisioning of equipment with Bluzone cloud

account and project. This install guide is intended for technicians. The HID BEEKs Bluetooth Low Energy (BLE) Module supports

transmission of data from wired sensors utilizing a variety of protocols, including UART, SPI, and I2C.

Additionally, the built-in 12-bit analog-to-digital converter provides support for analog output sensors. The BEEKs BLE Module

therefore enables custom solution development for a wide range of applications.

When combined with HID Global's end-to-end IoT ecosystem, which includes BluFi™ BLE-to-WiFi gateways and the Bluzone™

cloud services, the BLE Module can be centrally managed remotely through the cloud to transfer new messages and firmware

updates. The unique design allows BEEKs BLE Module to broadcast reliably, even in densely populated WiFi environments.

The BLE radio enables the module to transmit the data from wired analog and digital sensors for a variety of applications. Bluzone

allows you to control the transmitting capabilities of the module.

System components

BluFi™ model BluFi-AC00 – Bluetooth to WiFi Gateway

Bluzone – Cloud Fleet Management and Condition

Monitoring dashboard.

BLE Module model MOD001 Bluetooth Low Energy Module

Best practices

• Maximum of 15 – 20 beacons per BluFi for best results

• Maximum 20 – 30 meters from beacon to BluFi for best

results (distance will decrease for increased interference/

blockages). For RTLS applications, the BEEKS Duress

Badge signal must be received by at least three BluFis in

the vicinity.

Network troubleshooting

• 2.4 GHz WiFi only

• HTTPS port 443 must be open

• DHCP required

• 1 Mbps upload speed required

• Captive WiFi portals not compatible

• Compatible certificate formats: .pem, .der

• Some networks may require adding the BluFi MAC

address to an allowlist

PLT-06387, Rev. A.0

Terminology

Bluzone – Secure cloud-based SaaS to centrally manage BEEKs

via BluFi gateways. Additionally, monitor, store and analyze

performance data collected from deployed fleet.

BluFi Gateway – Receives data from BEEKs over Bluetooth

and sends to Bluzone Cloud.`

BLE Module – Sends data from wired sensors to BluFi.

Prerequisites

• Set up Bluzone account

• Download Bluzone mobile app

• Additional installation guides are available and can be

found at:

WiFi

Bluetooth

https://hid.gl/HID-BluFi-installation

Bluetooth

January 2022