HID MOD001 설치 매뉴얼 - 페이지 2
{카테고리_이름} HID MOD001에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID MOD001 11 페이지.
Powering
Trusted Identities
1. Module mounting
BLE Modules should be mounted with screws to rigid standoffs using the two through-holes on the printed circuit board
assembly (PCBA).
Hole 1 diameter
(2 mm)
23.50 mm
Hole 1 location
(3.62 mm X 10.03 mm)
The modules may be mounted in a custom enclosure or to a surface that is isolated from contact. It is recommended that the module be
covered to avoid damage to the board and components.
PLT-06387, Rev. A.0
30.50 mm
2
HID® MOD001
Install Guide
Hole 2 diameter
(2 mm)
Hole 2 location
(5.91 mm X 5.90 mm)
January 2022