HID MOD001 Kurulum Kılavuzu - Sayfa 2
Kontrol Ünitesi HID MOD001 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HID MOD001 11 sayfaları.
Sayfayı YazdırPowering
Trusted Identities
1. Module mounting
BLE Modules should be mounted with screws to rigid standoffs using the two through-holes on the printed circuit board
assembly (PCBA).
Hole 1 diameter
(2 mm)
23.50 mm
Hole 1 location
(3.62 mm X 10.03 mm)
The modules may be mounted in a custom enclosure or to a surface that is isolated from contact. It is recommended that the module be
covered to avoid damage to the board and components.
PLT-06387, Rev. A.0
30.50 mm
2
HID® MOD001
Install Guide
Hole 2 diameter
(2 mm)
Hole 2 location
(5.91 mm X 5.90 mm)
January 2022