HID MOD001 Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HID MOD001. HID MOD001 11 pages.

Powering
Trusted Identities

1. Module mounting

BLE Modules should be mounted with screws to rigid standoffs using the two through-holes on the printed circuit board
assembly (PCBA).
Hole 1 diameter
(2 mm)
23.50 mm
Hole 1 location
(3.62 mm X 10.03 mm)
The modules may be mounted in a custom enclosure or to a surface that is isolated from contact. It is recommended that the module be
covered to avoid damage to the board and components.
PLT-06387, Rev. A.0
30.50 mm
2
HID® MOD001
Install Guide
Hole 2 diameter
(2 mm)
Hole 2 location
(5.91 mm X 5.90 mm)
January 2022