HID MOD001 Instal Manual - Halaman 2

Jelajahi secara online atau unduh pdf Instal Manual untuk Unit Kontrol HID MOD001. HID MOD001 11 halaman.

Powering

Trusted Identities

1. Module mounting

BLE Modules should be mounted with screws to rigid standoffs using the two through-holes on the printed circuit board

assembly (PCBA).

Hole 1 diameter

(2 mm)

23.50 mm

Hole 1 location

(3.62 mm X 10.03 mm)

The modules may be mounted in a custom enclosure or to a surface that is isolated from contact. It is recommended that the module be

covered to avoid damage to the board and components.

PLT-06387, Rev. A.0

30.50 mm

HID® MOD001

Install Guide

Hole 2 diameter

(2 mm)

Hole 2 location

(5.91 mm X 5.90 mm)

January 2022