ADEMCO LYNX 시스템 매뉴얼 - 페이지 8

{카테고리_이름} ADEMCO LYNX에 대한 시스템 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO LYNX 14 페이지.
ADEMCO LYNX에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 빠른 시작 매뉴얼 (8 페이지)

Ademco Lynx System Manual

1. The keypad beeps twice for invalid data entries (e.g., an hour greater than 12), and the entry will not

be accepted. The keypad beeps once for valid entries.

2. Clock-Setting mode automatically ends if no keys are pressed for one minute.

3. Daylight savings time may have been programmed to automatically begin and end.

1. Hour (The current hour will be displayed with the AM/PM indication.)

Enter the 2-digit hour (i.e., 01-12).

Press [*] to accept the entry and continue to the AM/PM selection.

Press [#] to exit Clock-Setting mode (keypad beeps 4 times).

2. AM/PM (The current AM/PM setting will display A or P.)

Enter 1 for PM or 0 for AM.

Press [*] to accept the entry and continue to the minute selection.

Press [#] to return to hour-setting prompt.

3. Minute (The current minute will display.)

Enter the 2-digit minute (i.e., 00-59).

Press [*] to accept the entry and continue to the month selection.

Press [#] to return to AM/PM setting.

4. Month (The current month will display.)

Enter the 2-digit month designation (i.e., 01-12).

Press [*] to accept the entry and continue to the day selection.

Press [#] to return to the minute setting.

http://alpha.adt.com/help/261[11/14/2018 8:02:22 PM]