Dynalink A 3605 사용 설명서 - 페이지 13

{카테고리_이름} Dynalink A 3605에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalink A 3605 17 페이지. Hdmi 4k wireless sender system

A 3605 HDMI 4K Wireless Sender System

Troubleshooting (continued).

Q2. No or bad connection between the HD transmitter and HD

receiver

1. Move the HD transmitter and/or the HD receiver from the immediate

vicinity of the connected HDMI sources and Wi-Fi equipment. These

may affect the range.

2. Slightly adjusting the position of the HD transmitter and/or HD

receiver may already help out.

3. Too much distance or obstacle between HD transmitter and HD

receiver. Try using shorter distances.

4. Disconnect the power adapters from the wall socket and reconnect

them to reboot the 4K wireless HDMI extender.

Q3. I do have picture, but no (or bad) sound

The Wireless HD supports up to 2CH PCM stereo.

Check the audio setting in the settings menu of the connected HDMI

source and manually set it to 2CH PCM stereo when the automatic set-

ting does not work.

Q4. The IR blaster doesn't work

1. Make sure to use the original remote control of the video source.

2. Please stick the IR emitter probe in the surface of IR window of the

source device, if you are not sure the correct position of IR window of

source device,

3. Please refer to the manual of source device.

4. Please point the remote control to the IR receiver probe within 5m.

5. The IR extender cable based on 20KHz-60KHz remote signal protocol,

which support most of the IR remote in the market, for special

standard or old remote may not supported.

12.