HID iCLASS SE RB25F 사용자 설명서 - 페이지 9
{카테고리_이름} HID iCLASS SE RB25F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HID iCLASS SE RB25F 18 페이지.
Powering
Trusted Identities
1.4 Hardware reset the RB25F
Resetting the RB25F device to factory defaults should, where possible, be carried out through the HID
Biometric Manager application. Refer to the HID Biometric Manager Administration Guide (PLT-04029). In
the event that communication between HID Biometric Manager and the RB25F is not possible, carry out the
following hardware reset at the reader:
1. Unscrew the installation locking screw from the bottom of the RB25F mounting bracket.
2. Slide the RB25F upwards and remove from the mounting bracket.
3. From the back of the reader, remove the label that covers the contacts.
4. With power supplied to the reader, short the contacts together using a suitable metal object.
5. Maintain the short for a full five seconds. The RB25F will beep while you hold the short.
6. One long beep of two seconds confirms the reset. All device settings will be returned to the default.
You will need to install and update the device in order to return it to the former working level.
PLT-04900, A.0
9
HID®iCLASS SE® RB25F
User Guide
May 2020