HID iCLASS SE RB25F Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Rfid системы HID iCLASS SE RB25F. HID iCLASS SE RB25F 18 страниц.

Powering

Trusted Identities

1.4 Hardware reset the RB25F

Resetting the RB25F device to factory defaults should, where possible, be carried out through the HID

Biometric Manager application. Refer to the HID Biometric Manager Administration Guide (PLT-04029). In

the event that communication between HID Biometric Manager and the RB25F is not possible, carry out the

following hardware reset at the reader:

1. Unscrew the installation locking screw from the bottom of the RB25F mounting bracket.

2. Slide the RB25F upwards and remove from the mounting bracket.

3. From the back of the reader, remove the label that covers the contacts.

4. With power supplied to the reader, short the contacts together using a suitable metal object.

5. Maintain the short for a full five seconds. The RB25F will beep while you hold the short.

6. One long beep of two seconds confirms the reset. All device settings will be returned to the default.

You will need to install and update the device in order to return it to the former working level.

PLT-04900, A.0

HID®iCLASS SE® RB25F

User Guide

May 2020