Dynalite DUS804C-DALI 설치 매뉴얼 - 페이지 3

{카테고리_이름} Dynalite DUS804C-DALI에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalite DUS804C-DALI 4 페이지. Ceiling mount universal sensor

motion detector coverage at 2.4m mounting height

photo electric cell mounting location



Position the sensor so it "sees" a combination of artificial light and

natural light indirectly.



Position the sensor so it is not directly exposed to artificial light or

sunlight and glare.



Ensure that the sensor is directed onto working surfaces were

correct light level is required.



For programming instructions refer to Dynalite Tech Note - Setting up PE

functions

masking regions from motion detection

The DUS804C-DALI has a built in pull up mask that can be rotated to remove 120

used in situation when a section of the motion detection zone needs to be blocked out. When mounting the sensors in a single office the

mask can be used to block out motion that would be detected in the corridor causing false triggering of the sensor and then turning on

the lighting unnecessary. This feature does not affect the light level detection functionality of the sensor.

Lens mask down. Full 360

7.42m

of scanning available.

scanning range from the sensor. This feature can be

Lens mask up removing 120

from the PIR, leaving only 240

rotated to adjust the area being blocked out.

DUS804C-DALI Installation Manual Rev B.docx

5.66m

scanning range

. The mask can be