Dynalite DUS804C-DALI Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари Dynalite DUS804C-DALI. Dynalite DUS804C-DALI 4 сторінки. Ceiling mount universal sensor
Друкувати сторінкуmotion detector coverage at 2.4m mounting height
photo electric cell mounting location
Position the sensor so it "sees" a combination of artificial light and
natural light indirectly.
Position the sensor so it is not directly exposed to artificial light or
sunlight and glare.
Ensure that the sensor is directed onto working surfaces were
correct light level is required.
For programming instructions refer to Dynalite Tech Note - Setting up PE
functions
masking regions from motion detection
The DUS804C-DALI has a built in pull up mask that can be rotated to remove 120
used in situation when a section of the motion detection zone needs to be blocked out. When mounting the sensors in a single office the
mask can be used to block out motion that would be detected in the corridor causing false triggering of the sensor and then turning on
the lighting unnecessary. This feature does not affect the light level detection functionality of the sensor.
Lens mask down. Full 360
7.42m
o
of scanning available.
o
scanning range from the sensor. This feature can be
Lens mask up removing 120
from the PIR, leaving only 240
rotated to adjust the area being blocked out.
DUS804C-DALI Installation Manual Rev B.docx
5.66m
o
scanning range
o
. The mask can be
3